How to use and maintain home by home repair tool equipment

Household tools Home tools are tools that are essential for home repair or home improvement. Each tool is tailored to the specific nature of the task, so choosing the right tools and knowing how to properly maintain the tools will help us work better. House tools include: Tool How to use and maintain 1. filing Made of metal with many shapes, such as filings, rounded, triangular filings. Hemispherical filaments Square fillet and flat fillet fillet are a kind of cutter or shear tool. There are many small teeth. The teeth are made of very solid metal. It can cut or shear the weaker material. Scraps of metal or wood will be much smaller or less with the teeth of the filings. Used to decorate the metal surface smooth. Remove the sharp or make the shape as desired. The length of the file is about 3-18 inches. After use Use wire brush to clean the groove to get rid of dirt that clogs. Do not use the knock method. And should be stored in a box or in a place to hang the file. 2. extract Made of metal with many shapes according to the characteristics of the extractor. Extraction is a repair tool that works with hammers. It is used to extract the excess metal scrap on the metal surface. Cut the knots or extract the spiral that is not removable. Cutting off excess welds, cutting metal plates and grooves, extracted from fine steel. The hardness and toughness of conventional steel. 4-8 inches long The body will be hexagonal. The header is a flat sphere. The tip, which is used as a sharpener for metal cutting, has several types, such as flat tip, tip tip and end cut tip, each is also suitable for different applications. After use Keep in a clean and dry container. 3. Chisel Made of metal with a variety of shapes, such as chisel, mouth, thin chisel, thick mouth is a tool in woodworking with a hammer. Used to dig groove Decorate the wood in the adjoining hinges, uneven drawers, cabinets or tables. After use, clean by wiping with oil to prevent rust. And keep it in a safe place The weather is not damp 4. Saw A saw for woodworking in general Made of thin sheet metal Have teeth The teeth of the saw blades vary according to their use. After use, the saw blade should be cleaned and the saw blade is always sharpened. Apply with oil and keep it covered. 5. metalworking Hand saws are another cutting or shearing tool that is widely used. Hand saws are ideal for cutting pipes. Or a small round bar. And metal plates too thick to use scissors. Hand saws can be divided into 3 parts: the saw structure will hold both adjustable and adjustable saw blades. It acts to cut the metal, so it must be made of special materials. After use The saw blade should be removed from the sawing frame and stored with oil. In the frame, the saw to hang in the prepared. 6. Screwdriver Handles made of plastic, wood or metal, metal or metal handle. Screwdriver is divided into 3 parts. Handles are made of wood. Metal or plastic Stem or core Used to send torque to the tip. Made of metal, rounded or rounded, or inserted into the groove of the screw head or bolt is made of metal mouth, there are two types of mouth, four lobes and flat mouth screwdriver is a tool used for tightening or loosening. Screws and bolts, wooden or metal fasteners After use Must be cleaned and stored in a dry place. 7. wrench The wrench is divided into 3 types of wrenches, wrenches, dead wrenches and special wrenches, wrenches or wrenches. The wrench is a torque wrench that is used to fasten or loosen bolt nut bolts. After use Should be kept in a wrench Or hang it on a wooden panel. 8. pliers Tweezers are tools that use torque for gripping, bending and cutting things such as sheet metal, wires, small tubes and wire, and so on. There are several types of radio or electronics and car pliers. Flat mouth pliers or pliers, mouthpieces, pliers, mouthpieces, wrenches, cutters and diagonal cutters. After use To keep the pliers for long. Should oil at the turning point of the pliers. And should be periodic drops. And after daily use should be wiped clean. Then keep it in a prepared or safe place. 9. hammer Handles made of wood or steel, and the hammer head section is made of steel. The hammer is used for nails. The tail is a V-shaped for pulling or removing nails. Hammer is a shock tool for nailing or removing nails. The ideal hammer should weigh 6-9 kg. After use Clean the hammer and hammer thoroughly. Should be the only hammer. May be put cabinet box or tool panel. 10. flying planks It is a tool used to adjust the surface of the wood to smooth or sharpen the frogs. There are two types of frogs are used for cutting the surface rough. Frog skin to smooth the surface more smoothly. After using the frog wipe clean. Apply oil to frog leaves to protect against rust. 11. scene Used as a level verification tool and used as a draft line on a work piece. 12. Cartridges Measure distance The inside of the cartridge is made of metal. Can spring well to tell both inches and meters.